|
Resources & Helpful Information
| |
|
|
|
Includes the following items:
4-Carbon Fiber/Kevlar Mesh Corner Stitches (4"X24")
8-Carbon Fiber/Kevlar Mesh Leg Straps (4"X4')
4-300X600 ml Fortress Toughened Epoxy w/Static Mixers
1- Notched Trowel
ADVANTAGES:
- Low profile and can be installed behind brick facade or other building facades.
- Legs or overlaps can be added to extend loads
- Parge coats and painting can be used for aesthetics
- Installs in same fashion as straight carbon plate or grids
- Reduces or illuminates contractor error in bending FRP to far to carry load
- Most corners are manufactured with peel-ply technology
|
Fortress Corner Kits replace Steel strapping on Foundation Corners
Making permanent repairs to the corners of a foundation is easy with Fortress carbon fiber corner strap and stitches. Our corner kits are applied to the outside corner of the foundation and are of the same quality found in all Fortress products.
The corner straps are encapsulated in the same toughened epoxy used to reinforce block and concrete walls. Because they are made of carbon fiber they will not rust or deteriorate.
Two carbon fiber/Kevlar corner grid straps, four 48" carbon fiber/kevlar grid straps will permanently repair this structure. Note the overlap and how the grids are used to stabilize the foundation quickly and cost effectively.
|
|
